Time to talk skirts! This is the last construction based post for the dress in sure you’re relieved to hear but if you’ve ever been curious about putting a zipper in a sheer skirt I’m sharing how I did it.
The skirt is a 3/4 circle that I drafted on Swedish tracing paper using an online tutorial. Each layer is constructed individually. The base is silk satin, then rose print, then organza. There’s also a satin lining layer facing inwards in liquid satin. All are constructed with tiny French seams. I agonized over this because the rose organza bias seams were hard work. No matter how carefully I sewed them or what tricks I tried they fought laying flat.
I made two skirts and picked the least wobbly, managed to steam them pretty straight and accepted the top layer would cover them better and the petticoat would support the seams. I think it’s due to the design being printed on top of the fabric because the floral areas are a lot stiffer than the sheer area so the stretch isn’t even. Not all fabrics behave the way you want them to. Safe to say the silk layers sewed beautifully.
I didn’t want all the layers joined at the centre back of the skirt so each layer is French seamed up to the zipper opening and then clipped at an angle to sit flat. Then I could turn all the layers under together for my lapped zipper. I know the above photo doesn’t look like anything but that was the point!! The clipping (at the rose area) is near invisible. The clipping at an angle helps prevent fraying and the organza softens everything making it look hazy underneath.
Hemming the layers was awful. Utterly awful! The different layers dropped in different ways and I had to decide if I would try and level them evenly or stagger them. I wore my full outfit and my bridal seamstress expert/bridesmaid Charly came round and pinned all the layers to the same height. I then trimmed and did rolled hems on my overlocker all to the same length.
The problem with circle skirts though is that as they swish they constantly look slightly uneven. Multiple floaty layers make this more noticeable which is frustrating when you know it definitely IS even! But all you need to do is re-swish your skirt and things look better. My rolled hem settings took quite a while to work out as they needed to change a bit for each layer. They look identical above but the width and tension needed tiny tweaks. It’s very easy to get too close to the edge on a sheer fabric and then the rolled hem just pulls off so speed is the enemy. In hindsight I wish I’d levelled the layers off slightly staggered. It would have been hell to do but looked a bit better.
You might ask if the lining was necessary when I had a crinoline petticoat on underneath. Well I thought in case I took the petticoat off for the evening (which I did) or if I wear it again (which I might) it would be nice against my legs.
It was staggering 35 degrees on my wedding day so I decided to pop back to my room half way through the evening do. Run around in my underwear in the air conditioning and then pop the dress back on without the petticoat. We’re on the home straight with wedding dress posts now. I hope you’re still finding them interesting!