Read the collection:
Not just the title of a movie, this Christmas break I also went to the wedding of my best friend and her lovely partner. It was a slightly unusual day in that we started with a 10am ceremony, then went for pie and a pint at a local pub, dashed off to the woods for a game of laser quest and then went to a swanky hotel for the wedding breakfast and evening do.
Yes you heard me right, we did all of this on the 28th of December! It was busy, brisk and lots of fun. And I had the joy of seeing months of work come to life in a different way from my wedding. I not only worked on Becky’s dress, but made my bridesmaid dress and made ties and pocket squares!
First things first, Becky wore an off the shoulder fishtail lace gown. It had an illusion back, fitted silhouette and reasonable size train. It was made half way between Oxford and Leeds as Charly and I joined forces to get the dress made in time. Charly as you may remember is an accomplished bridal seamstress so she took the lead, drafting the pattern, fitting the toile and ordering the supplies.
We had a major cutting out session as a group to get the satin, tulle and lining layers all ready and then constructed the majority of the dress ready to get the lace attached. Charly designed the pattern for the lace placement and over several long sewing sessions we hand appliqued lace into place. Charly added the motifs to the bodice and created the illusion while it was on the mannequin and I made 7 skirt panels that would be added to the skirt later so I could keep the work at home with me.
After a slight mishap breaking with her ankle, Charly wasn’t able to finish the dress so she came home to live me for the last few weeks. I added an elastic waist stay, sewed a bra into the dress, attached the lining and hemmed the layers. Because of the beading, none of the lace could be machine sewed so I did have a slight claw hand by the end of things but it’s an absolutely gorgeous dress, so Charly and I were really proud on the day.
Our bridesmaids dresses were made from different patterns but designed to have a similar feel. I used Threadcount 1610 which you saw on the blog recently and added a three quarter circle skirt using the pattern from my wedding dress! The wine duchess satin was lovely to work with and though I had to cut everything out on the crosswise grain it didn’t reduce the shine that much which I was very pleased with. Becky asked us to channel our inner 50s housewife with pearls and vintage stoles (made by Charly) which I happily embraced.
Ties and pocket squares I’ve made before for Mark and Nickki’s wedding but I forgot how much I HATE POCKET SQUARES. They should be called “little squares of evil”. Never again I say, do you hear me universe?! Luckily I only had to make two pocket squares, plus two grown up ties and two tween-age ties. I adapted my tie pattern to make them roughly 13″ long when tied then made a neckband that finishes with velcro for ease. I mean I learnt how to knot a tie at 12 but only because it was part of my uniform; most young ones don’t learn until much later. Ties are very therapeutic to hand sew closed. You machine sew the short facing pieces to the ends, trim and turn through then press over the edges and hand sew close to the fold. It’s definitely a personal choice on whether to interline the whole tie for more bulk. Last time I did but with the trend for skinny ties these days I decided not to this time.
I’ll leave you with some photos from laser quest. It was certainly different running around the woods in a boiler suit then having to race back to the hotel and get re-ready for a wedding! It all turned out perfectly though.
The thing I’m most proud of on my wedding dress is how my beginner attempts at draping went. The whole bodice fit and looked exactly how I wanted.
I used an ivory satin base, rose print organza in between, and soft organza with subtle twinkle on top. With luxury interfacing and a boned muslin layer for support the bodice took the longest time to complete.
I started by mounting the rose print on top of each silk that was interfaced with my luxury weft interfacing from Alison Smith’s bridal sewing course. I agonized over the rose placement but in reality I didn’t need to bother as it’s just fuzzy pink underneath the finished bodice.
I assembled all the seams, clipped and notched then catch stitched the allowances. I then padded my mannequin and pinned my bodice up.
To drape the bodice I tried a few different size pleats (see below) but decided 1″ overlapping pleats pointed upwards looked best. Bestie, bridesmaid and bridal seamstress Charly advise positioning a big piece of fabric with the crosswise grain straight across the bodice, keep it pinned to my mannequin body, and then create the pleats.
Starting with the left hand side I had to hand stitch the under bust seam line and then trim the excess fabric down to a hideable length. This was turned under and stitched in place. I used a strand of yarn to remind me of the best curve for my right hand side seam line.
Draping the right side was much harder. I had to create a neat fold that started at the centre front point and then swooped aggressively to cover the seam line. I was too scared to mark the seam line on the fabric in case it didn’t come out so just put one tiny pink dot in fabric pencil at the centre point of the V. The organza was very resistant to draping into such a strong curve and it took 5 or 6 attempts. Then I had to match the second pleats on each side so they were the same height at the princess seam point but it still had to swoop under the bust pleasingly.
On both sides the most difficult areas were just under the bust point where a dart would easily absorb the curve. The organza was very difficult to position and I must have gone over the left facing side 15 times or more. Watch my upcoming video to see why. Eventually I found a way to absorb the excess and keep the pleats the same width. Lots of twisting the organza about and draping the full curve rather than trying to drape it in small sections.
The pleats start to overlap at the side seam, but I wanted them to be hidden neatly underneath each other – so the number of pleats at the side seams were even ready to match at the centre back. The pleats needed to be parallel across the waist to be flattering, but those last two pleats curve off into the seam allowance at the back away from the CB seam.
The other tricky aspect was pinning everything in place without catching the bra or padding on the mannequin below. And not pulling the organza too taught, distorting the rows above or fabric below.
To secure the pleats I decided to stitch at the princess seams and side seams then scattered stitches all over the bodice. I had to stitch in two ways; First tiny tiny tiny prick stitches at the top edge of the pleat (at the seam point), so tiny they weren’t really visible. Then prick stitches at the bottom edge of the pleat, inside the fold (for the stitches scattered around the bodice). There were a few places the stitches showed and undoing them was panic inducing. I stitched each seam in one go but for the scattered stitches these were done individually and knotted off/snipped before starting again in another place.
The muslin inner bodice was cut slightly smaller that the outer because all the organza made the bodice very firm and the muslin still had a little stretch. My boning was cut from an old h&m dress. The one I wore to charly’s wedding in fact. It’s as thin as lingerie boning (about 4mm wide, 2mm thick), clear and very smooth. It’s bendy but was already in a curve. I don’t know if it was set into shape during construction or if years of being in the dress moulded them into their shape but they fit like a dream.
Most advice for bridal sewing is to not place boning in the princess seams. It creates false shape, doesn’t add support over the bust and prevents adjustments down the line. BUT I ignored this because 1. As the bones were perfectly shaped to match my body they created a great shape, 2. I don’t need the bones to hold my bust up as I’m small chested and have a good bra, and 3. I hoped not to have to make adjustments. I made channels out of more muslin and stitched them inside with a little bit of wiggle room above and below which is very important for you to bend or move about. The muslin was the placed RS to the wrong side of the bodice and basted all around.
Aligning the pleats at the centre back was eyes down and hope for the best. The lapped zipper could have ruined everything. Everything was basted around the outer edges then the excess trimmed down. One wiggled out of place in the end but I don’t really care.
The last bodice stage was to install a lining made of duchesse silk satin. Seam allowance was clipped to help the sweetheart bodice shape, turn through neatly and understitched, then handstitched into place. And I decided to add rubber trimmed elastic to help the dress hug my body at the upper edge. A less attractive finish but worthwhile for that sense of security if you’re an enthusiastic dancer like me.
Next up! A look at the skirt. I promise it won’t be as long as this post. I’ll also sharing sewing tips, costings and more before the end of the month. Any queries please do share them!