Hello lovely people. Are you sitting comfortably? Then I’ll begin… Easter weekend I was due to go to a fun dinner with my extended family to celebrate my Auntie’s big birthday. Alas it was cancelled for obvious reasons. I’d already made the dress so I’m getting around to sharing it now.
Butterick 6446 has been in my stash for a while. I first tried the pattern last March with my celestial gold mesh fabric but the stiffness of the glitter meant the folds on the bodice didn’t sit flat. But flash forward to Feb 2020 and we have a winning fabric + pattern combination.
Enter Wow Fabrics. They offered me the chance to join their blogger network after I left Love Sewing. You might have noticed I had dialled back on all those kinds of partnerships for a while but now it’s great to be collaborating again! You might remember my sweatshirt made with their interesting scuba like base. I like to try a company once before committing to ongoing partnerships. They let me print 3 metres of fabric for free to test the site and fabric quality. I’m always honest in reviews so you don’t have to worry about that. I can’t comment on delivery times as my fabric was de-prioritised behind real orders which I think is absolutely fair when I wasn’t paying and wasn’t in a rush.
I printed my own star design on the bubble crepe which has a lovely pebble texture and slight spandex stretch. The shade of blue I was able to achieve is perfect! I had saved so many azure/turquoise/cyan with white polka dot dresses on Pinterest and now I have my own to wear. It’s totally opaque too which is really important for me.
I like Wow Fabrics because the range of base fabrics they have are quite interesting. The upload process when printing your own design might not be as helpful and explicit in the instructions as other ‘print your own fabric’ companies but it still works if you’ve prepped your swatch right. For beginners it might be scary so definitely use the A4 sample option!!
I cut a 12 at the upper bodice grading to the size 16 ish at the waist (I only had the smaller size pack so got inventive). You might have noticed a couple of alterations to the base design. Because I had 3m, the ruffle was cut out at the end when I was sure I had enough for the dress. I cut the tissue for skirt version B then made a ruffle using the offcut tissue marking up 20cm from hem line D. I also added little cap sleeves from New Look 6808 for some extra coverage.
The fit of this dress can look a little odd as it crosses over the bust rather than under it. This makes for more modest coverage which is nice. But be aware the under bodice wrap may stick to your bra and wiggle out of place. Wearing a slip helps me but I should have perhaps lined the bodice in something silky rather than self fabric.
I overlocked everything and used a concealed zipper in the back. I was lucky enough to have the perfect thread and zipper colours in my stash so could get started right away. It sewed up pretty quickly so I tried to take regular breaks to slow down.
While its a lovely dress I’m not sure if I’ll make it again. The bodice moves around a little too much for me to keep an eye on but the skirt is fabulous. Maybe I’ll mash it with another bodice soon! If you’ve made this dress please let me know in the comments.
Designing your own version of this print
I went on a fabric design course a few years back, I have also ordered custom fabric before and I am quite confident in Adobe Photoshop (fyi this is a paid for product). To ease myself back in I decided to start simple with a repeating star print using the polygon shape tool. My tips below are for people who have already had a go with Photoshop so I don’t go into explicit detail about the settings. This is beginner level stuff though so have a play!
I think a lot of people forget scale when designing fabric so to avoid a print that’s too ditsy, try a minimum of a 15x15cm frame aka 1772x1772pixels. It has to be 300dpi (dots per inch). That’s print quality: it doesn’t matter how good something looks on your monitor! And if you can print it out when you’re done and hold it on your body to check you like the scale.
Another common habit is people add a single beautiful motif to the middle of the square and end up with a very regimented tile that looks a bit like checked fabric. The offset filter is the easiest way to avoid that.
Make a star print like mine as follows: With guides visible on the screen add some star shapes around the middle of frame (I don’t try to be symmetrical but the overall spread of shapes around the centre point should be balanced).
Merge all the shape layers and then duplicate so you have two versions of shapes and one colour background. Then apply the offset filter – Filter> Other> Offset with 886 pixels in each box (half the height and width). That will split one layer into perfect quarters and place in the frame corners.
After that, go back in and add more shapes to the surrounding areas, again in a non symmetrical pattern making sure to cross the guides and avoid shapes disappearing off the edges. Keep the same density of shapes you had at the start.
Merge layers then go to Edit> Define pattern > give it a name. Make a new file to test your pattern. It should be at least 100x100cm. Go to Edit> Fill> Use Pattern and select your pattern from the drop down. Use the existing settings.
Do you like what you see? If you need to make tweaks, unmerge the layers on your tile and move add shapes before merging again and defining a new pattern.
Happy New Year everyone!! It’s an brand new decade and I’m both nervous and excited for 2020, a classic cocktail of emotions. With only a few days left in my Love Sewing role, I’m getting ready to say goodbye. There is lots to sort in my sewing room too. There’s new work clothes, pattern testing, fun collaborations and probably another destash sale on the horizon!
Enough on that for now. Let’s talk jumpers (aka ‘sweaters’ or ‘sweatshirts’, for my international friends). I’ve made a few sweatshirts and never blogged them but somehow this one is breaking that spell. It’s a bold colourful print which is keeping me very warm!
The Simple Sew sweatshirt is an oldie but a goodie with raglan sleeves and ribbed cuffs, neck and hem bands. I made view B and originally added the hem band but it felt a little bulky and long in this fabric so took it back off and hemmed the jumper shorter. This is the size 10 graded to a 12 at the hips. The structure of the fabric means I should have graded the sleeve hems out a little more to be able to push them up my arms… oh well.
A jumper like this can be totally constructed on your overlocker but there are a few small places it can help to sew… 1) cuff and neckband side seams: to avoid bulk and because you never even see the seam edge. 2) underarm points: If you’re a stickler for a neatly intersecting seam sew the sides up on your machine first to avoid the fabric creeping. 3) Hem: If you skip the hem band like me, you’ll have to hem on a machine, unless you have a coverstitch you lucky thing!!
This loopback palm leaf knit was a gift from wowfabrics.co.uk – look for J173 ABSTRACT FLORAL JUNGLE PRINT. From 2m I have so much leftover it’s crazy! It’s definitely heavier than sweatshirting; a bit closer to scuba and has a lovely fleece backing adhered to it. My overlocker blade hated it so I trimmed all my seams before overlocking them. The ribbing is from Abakhan and I got the co-ordinating teal sweatshirting too. In fact I’ve already made another winter jumper with it!!
I liked the fabric so much I’ve decided to join the Wow Fabrics blogger team and have created three of my own fabric designs to test out the print quality of their custom fabric printing service! A satin, bubbled crepe and cotton jersey. More details on that soon!